Accessible Sign: What It Is, Symbols, Sizes, and Rules
An accessible sign is a sign that marks an accessible feature, such as an entrance, parking space, or restroom, with the International Symbol of Accessibility. It can also be a sign that presents its information in a form people with disabilities can use, such as raised characters and braille. Under the ADA, the symbol is fixed, the mounting heights are fixed, and the character rules are specific. Colors, panel sizes, and extra wording are mostly left to state and local rules.
This guide covers which accessible signs the law requires, what each symbol means, and how high to mount each type. It also covers what to look for in materials. You will find a worked example for a typical parking lot, a list of mistakes that fail inspections, and a plan for ordering signs without buying twice.
Safety Decals is a Michigan-based maker of safety signs and decals, so the buying advice reflects how outdoor signs are built and ordered. The rules come from the U.S. Access Board's guide to the 2010 ADA Standards, which you can read in full in its signs chapter.
Why accessible signs matter for your property
What the law expects from you
Accessible signs matter because the ADA requires them at specific places, and that requirement reaches stores, schools, factories, offices, and public lots alike. Title III covers businesses open to the public, and Title II covers state and local governments. The 2010 ADA Standards for Accessible Design contain the sign rules. They apply to new construction and alterations since March 15, 2012.
Existing buildings are not exempt. A business must remove barriers where that is readily achievable, which means doable without much difficulty or expense. Posting or correcting a sign nearly always meets that test. The Access Board writes the standards and the Department of Justice enforces them, and a complaint from a customer or employee is often what starts a review.
The ADA asks for the right symbol in the right place at the right height, and it leaves decoration to you.
What a wrong or missing sign costs you
A missing or wrong sign creates problems for visitors first and for you second. Most of the damage is easy to prevent:
- A visitor who uses a wheelchair drives to an inaccessible door and has to circle the building.
- An unmarked accessible space gets used by anyone, and in many states a space without a proper sign is hard to enforce.
- A sign mounted too low has to come down and go back up, so you pay for labor twice.
- A documented violation gives a complainant something concrete to point to.
None of these costs is large on its own. Together they are far more than the price of a few signs.
Who accessible signs serve
Accessible signs serve people with different needs, and the rules split along those lines. Visual requirements such as contrast, non-glare finish, and readable character height help people with low vision. Tactile requirements such as raised characters and braille help people who are blind or have low vision find and read a sign by touch.
Hearing is covered too. Signs with the International Symbol of Access for Hearing Loss show where assistive listening systems are available. The International Symbol of TTY marks text telephones. Knowing which group a sign serves tells you which rules apply to it.
Which accessible signs the ADA requires
The signs the standards require
The standards require accessible signs at a short list of locations, and most of them involve the International Symbol of Accessibility (ISA). A recurring condition is that the symbol is required unless every element of that type is already accessible. A building where every entrance and restroom is accessible does not need ISA signs on them.
| Location | What is required | Key rule |
|---|---|---|
| Accessible entrances (when some are not accessible) | ISA at each accessible entrance | Directional signs at inaccessible entrances point to the nearest accessible one |
| Parking spaces | ISA sign at each accessible space | Bottom edge at least 60 in above the ground; van spaces say "van accessible" |
| Toilet and bathing rooms (when not all are accessible) | ISA on the accessible rooms | Also direction to the nearest accessible room in altered buildings |
| Check-out aisles (when not all are accessible) | ISA on accessible aisles | Same location as other aisle identification |
| Existing elevators that do not comply | ISA on the compliant elevator | Applies only when some elevators fall short |
| Doors at exit stairways, exit passageways, and exit discharge | Tactile and visual signs | Can be on a separate sign |
| Assembly areas with audio amplification | International Symbol of Access for Hearing Loss | Marks assistive listening |
| Public pay phones with TTYs | International Symbol of TTY | Directional signs where phones lack TTYs |
The first four rows cover most small businesses, which is why the rest of this guide spends the most time on entrances, parking, and restrooms.
If every entrance, restroom, and parking space on your site is accessible, the standards do not require the ISA on any of them.
Signs that must comply only when you provide them
Room and space labels follow a different logic. The standards do not require you to label rooms with numbers or names. If you do provide a sign for a permanent room or space, such as a restroom, break room, or numbered office, it must have raised characters, Grade 2 braille, and visual contrast. Directional and informational signs, such as hours of operation or rules of conduct, must meet visual requirements but do not need to be tactile.
A single sign can mix content types. A door sign might carry a room number (visual and tactile), hours of operation (visual only), and an occupant name (neither). Judge each piece of content separately.
Signs that are exempt
Some signs are exempt from the visual and tactile requirements:
- Temporary signs posted for 7 days or less
- Building addresses and directories
- Occupant names and company names and logos
- Menus
- Seat or row designations in assembly areas
Suite, room, and dwelling unit numbers are not exempt. Signs in non-public areas of detention and correctional facilities are exempt, but signs in other non-public areas, such as a warehouse back office, are covered.
Accessible sign symbols and what they mean
The International Symbol of Accessibility
The ISA is the white wheelchair figure on a contrasting background, and it is the symbol the ADA requires on accessible entrances, parking, toilet rooms, check-out aisles, and compliant elevators. The International Organization for Standardization adopted it, and other U.S. codes, including the International Building Code, also require it. Using one familiar icon everywhere helps people with low vision or cognitive disabilities recognize it quickly.
The standards do not set a color, a size, or a minimum contrast ratio for the ISA. The figure and its background must have a non-glare finish, and the figure must contrast with the background, either light on dark or dark on light. Blue and white is the combination most people expect, and many state rules call for it, but the federal standard does not.
The two other required symbols
Two more international symbols appear on accessible signs, each with one job.
| Symbol | Meaning | Where it is required |
|---|---|---|
| International Symbol of TTY | A text telephone for people with hearing or speech impairments | Marks TTY-equipped public phones and directs people to the nearest TTY |
| International Symbol of Access for Hearing Loss | An assistive listening system is available | Assembly areas with audio amplification, and courtrooms |
Neither symbol has a mandated size. Any words added to these signs must follow the visual character rules, and for hearing loss it helps to say where listening devices can be picked up.
Updated and alternative wheelchair symbols
You will see signs with a forward-leaning, active figure. Some states and cities have adopted that updated icon, and sellers offer it widely. The ADA Standards still reference the traditional ISA. Where the standards require an ISA, you must use it even if a state or local rule names a different symbol.
A different symbol is allowed only under the equivalent facilitation provision, which requires the result to provide substantially equivalent or greater accessibility. The burden of proving that falls on you if the sign is challenged. Unless your local authority tells you otherwise in writing, the traditional ISA is the safe choice.
When the ADA requires the International Symbol of Accessibility, a different icon is only allowed if you can prove it works at least as well.
Accessible parking signs
How high to mount an accessible sign for parking
The bottom edge of an accessible parking sign must be at least 60 inches above the ground, so the sign stays visible over a parked vehicle. That answers the common question about the proper height for an accessible parking sign. The sign can sit on a post, a wall, or hang from a ceiling in a garage.
A symbol painted on the pavement cannot replace the sign, even where state or local rules require the painted symbol. Many state codes set their own mounting heights, so the federal 60 inches is a floor rather than a ceiling. If your state requires a higher mount, follow the higher number.
Van accessible spaces and how many signs you need
Each accessible space needs a sign, so the number of signs follows the number of accessible spaces. The 2010 Standards set the minimum number by lot size, and at least one of every six accessible spaces, and never fewer than one, must be van accessible.
| Total spaces in lot | Minimum accessible spaces |
|---|---|
| 1 to 25 | 1 |
| 26 to 50 | 2 |
| 51 to 75 | 3 |
| 76 to 100 | 4 |
| 101 to 150 | 5 |
| 151 to 200 | 6 |
| 201 to 300 | 7 |
| 301 to 400 | 8 |
| 401 to 500 | 9 |
| 501 to 1,000 | 2% of total |
| Over 1,000 | 20, plus 1 for each 100 over 1,000 |
Some facility types need more, such as outpatient medical sites, and a state code may require extra spaces too. A 60-space lot needs 3 accessible spaces, and one of those is a van space. Signs for van spaces must include the words "van accessible." You can print them on the main sign or add a separate plaque. The designation is informative, so a car can still use a van space.
Count your accessible spaces first, because the number of signs you order depends on that count and not the other way around.
Wording, size, color, and small lots
The ADA requires the ISA on the parking sign. It does not require a particular size, color, or extra wording. Words such as "Reserved" or a posted fine amount come from state or local rules, so check what your jurisdiction expects before you choose a design. A panel of 12 by 18 inches is a long-standing common size for reserved parking signs, and 18 by 24 inches is also widely sold.
There is one exception. A site with 4 or fewer parking spaces in total must still provide the accessible space, but the standards do not require a sign on it. Even then, many states require a sign before they will enforce the space, so a sign is usually worth posting. Residential facilities that assign spaces to specific units also skip the sign for those assigned spaces.
Accessible entrance and restroom signs
Accessible entrance signs and route signs
An accessible entrance sign carries the ISA and marks an entrance people can use without stairs or other barriers. It is required when a building has some inaccessible entrances. At each inaccessible entrance, a directional sign meeting the visual requirements must point to the nearest accessible one, and that directional sign is often called an accessible route sign. Where every entrance is accessible, neither sign is required.
Choose a mounting spot that someone approaching the building actually sees. The entrance sign belongs at the door or at the point where a person decides which door to try. The route sign belongs at the inaccessible entrance, and arrows must be unambiguous. Where the sign is post-mounted, keep it from protruding into a walkway, which Section 6 covers.
Restroom door signs
Restroom signs are where the tactile rules bite, because a restroom is a permanent room. A compliant restroom sign needs raised characters and Grade 2 braille naming the room, plus visual contrast and a non-glare finish. If you add a pictogram, such as a man, a woman, or both, it must sit on a field at least 6 inches high, with the raised text and braille directly below the field.
The ISA on a restroom sign is treated differently from a pictogram. The ISA must meet the finish and contrast rules, but it does not need the 6 inch field or a tactile descriptor. Use the ISA to mark which restrooms are accessible when not all are, and in altered buildings add direction to the nearest accessible one. Where every restroom is accessible, the ISA is not required.
A restroom door sign is a tactile sign first, and the symbol on it is secondary.
Accessible sign heights, sizes, and mounting
Raised and visual characters side by side
Tactile and visual characters follow different rules, and a single sign often has both. This table sets them side by side.
| Requirement | Raised (tactile) characters | Visual characters |
|---|---|---|
| Finish | Non-glare when they double as visual characters | Non-glare |
| Contrast | Light on dark or dark on light | Light on dark or dark on light |
| Case | Uppercase only | Upper, lower, or both |
| Style | Sans serif; no italic, script, or decorative | Conventional; same prohibited forms |
| Height | 5/8 to 2 in (1/2 in minimum if a separate visual sign exists) | Based on mounting height and viewing distance |
| Stroke thickness | 15% maximum of the uppercase "I" height | 10% to 30% of the "I" height |
| Raised depth | 1/32 in minimum | Not applicable |
| Braille | Grade 2, below the text | None |
| Mounting height | 48 to 60 in to the character baseline | 40 in minimum above the floor |
The standards do not set a minimum contrast ratio, but higher contrast is better, especially for people with low vision. Busy or textured backgrounds reduce contrast and should be avoided.
How tall visual characters must be
The minimum height of visual characters depends on how high the sign sits and how far away someone reads it. The viewing distance is measured to the nearest obstruction that prevents a closer approach.
| Mounting height | Viewing distance | Minimum character height |
|---|---|---|
| 40 to 70 in | Under 6 ft | 5/8 in |
| 40 to 70 in | 6 ft or more | 5/8 in plus 1/8 in per foot over 6 ft |
| Above 70 in to 10 ft | Under 15 ft | 2 in |
| Above 70 in to 10 ft | 15 ft or more | 2 in plus 1/8 in per foot over 15 ft |
| Above 10 ft | Under 21 ft | 3 in |
| Above 10 ft | 21 ft or more | 3 in plus 1/8 in per foot over 21 ft |
Take a sign whose characters sit 5 feet above the floor and are read from 10 feet away. That is 4 feet beyond the first 6, so you add 4 eighths of an inch to 5/8 inch, giving a minimum of 1 1/8 inches. A sign above 70 inches viewed from 20 feet works out to 2 inches plus 5 eighths, or 2 5/8 inches.
Where tactile signs go and what must stay clear
A tactile sign goes on the latch side of a single door, and the braille and raised text must sit between 48 inches (baseline of the lowest character) and 60 inches (baseline of the highest). If the latch side has no wall space, use the nearest adjacent wall. For a double door with one active leaf, mount the sign on the inactive leaf. For a double door where both leaves are active, mount it to the right of the door.
Reading by touch needs room. An 18 by 18 inch clear floor space must be centered on the tactile characters, free of protrusions up to 80 inches high, and outside the arc of the door swung open to 45 degrees. Signs on posts follow a separate rule. If the leading edge sits between 27 and 80 inches high, the sign cannot protrude more than 12 inches into a walkway. Signs hanging over a path must leave 80 inches of headroom.
Measure the clear floor space and the door swing before you pick the sign location, since the best-looking wall spot is often the wrong one.
Materials, finish, and contrast for accessible signs
Finish and contrast
Finish and contrast are the two material properties the ADA writes into law. Characters and their background need a non-glare finish and a clear light-on-dark or dark-on-light contrast. Glossy sign faces can wash out under bright lights or direct sun, and the standards treat that as a barrier for people with low vision.
Retroreflective sheeting, used on most outdoor parking signs, returns headlight and flashlight beams to the source rather than acting like a mirror. It is the standard choice for exterior parking signs, but the non-glare language is the reason to ask your local authority how it reads the rule on your site. For indoor signs, choose a matte face and skip anything glossy.
Outdoor sign materials
For exterior accessible signs, the base and the face both matter. Safety Decals builds its accessible entrance and parking signs from .080 aluminum, a heavy-duty gauge, with high-intensity reflective sheeting. The listings describe them as UV-protected and resistant to fading, corrosion, and weather, and as compliant with the MUTCD, the Manual on Uniform Traffic Control Devices.
The reflective face comes in four ORALITE grades, each under an ORAGUARD 5061 clear laminate:
| ORALITE grade | Type | Notes |
|---|---|---|
| 6700 Engineer Grade Prismatic | Type I | Entry grade for lit lots |
| 5900 High Intensity Prismatic | Type IV | Brighter than Type I |
| 7900 Wide Observation Angle Prismatic | Type IX | Designed for a wide viewing angle |
| 9900 Brilliant Grade Premium | Type XI | Brightest of the four |
In a well-lit lot, a lower grade can be enough. In a dim or unlit area, or on a sign people approach from a sharp angle, move up a grade.
Indoor tactile signs are a different product
The outdoor reflective signs above are not substitutes for interior room signs. A restroom or office sign needs raised characters and braille, so it is a different item from a reflective traffic sign. If you need tactile interior signs, contact Safety Decals at (888) 219-6301 to ask what is available, and ask any supplier to confirm braille grade, raised height, and finish before you order.
Match the product to the placement: reflective aluminum for the lot, and a matte tactile sign for the door.
How to choose and order accessible signs
A step-by-step ordering plan
Work through the decisions in this order and you will order once.
- Walk the site. List every entrance, restroom, accessible parking space, and elevator. Note which are accessible and which are not.
- Decide which signs are required. Use the table in the second section. If a whole category is accessible, you may not need a sign for it.
- Check state and local rules. Look for required wording, colors, panel sizes, and mounting heights that exceed the federal minimum.
- Count the parking signs. Use the space table, and make sure one in six accessible spaces is marked van accessible.
- Pick size and material. Match panel size to viewing distance and reflective grade to lighting.
- Plan the mounting. Measure post length for the 60 inch minimum and check walkway clearance.
- Inspect after install. Confirm heights with a tape measure before you call the job done.
A worked example for a 60-space lot
Take a 60-space lot with one accessible entrance and other entrances that have steps. The lot needs 3 accessible spaces, and one of them must be van accessible. You post 2 handicapped parking signs, 1 van accessible sign, and 1 accessible entrance sign. That is 4 signs in total.
At the listed range of $35.99 to $47.99 per sign, the total runs from $143.96 to $191.96 (4 times $35.99, and 4 times $47.99). That excludes posts, hardware, and installation. The inaccessible entrances still need directional signs, which you can request as custom wording or arrows. Entrance and parking signs are the only parts of this site that need purchased signs; the rest is mounting.
Safety Decals accessible sign options
Safety Decals lists these accessible signs in aluminum with ORALITE reflective grades. It is a family-owned company, and its decals and signage are made in America. It also offers custom wording, arrows, or layouts. For a custom order, email sales@safetydecals.com.
| Sign | Typical use | Price |
|---|---|---|
| Handicapped Accessible Entrance | Marks an accessible door | $35.99 to $47.99 |
| Handicapped Parking | Marks an accessible space | $35.99 to $47.99 |
| Handicapped Parking Only | Marks an accessible space with restricted wording | $35.99 to $47.99 |
| Handicapped Van Accessible | Marks or supplements a van space | $35.99 to $47.99 |
| Reserved Parking Accessible | Reserved accessible space | $35.99 to $47.99 |
| Reserved Parking Handicapped, Symbol (12 in by 18 in) | Reserved space with the symbol | $35.99 to $47.99 |
| Reserved Parking Van Accessible | Reserved van space | $35.99 to $47.99 |
The price within each range depends on the options you pick. Confirm the exact size and grade on the product page before you order.
Common accessible sign mistakes and how to avoid them
Mistakes that fail an inspection
Most failed inspections come from the same few errors. Check your own signs against this list:
- Pavement symbol only. A painted ISA does not replace a post-mounted parking sign. Add the sign with its bottom edge at least 60 inches above the ground.
- No van designation. One in six accessible spaces must carry "van accessible." Add a plaque or reprint the sign.
- Tactile sign on the wrong side. Move it to the latch side of the door, or to the inactive leaf of a double door.
- Braille on the wrong text. Braille must repeat the raised characters and sit below them. Capitalize only the first word of sentences, proper nouns, initials, and acronyms.
- Decorative type. Script, italic, and highly decorative fonts are prohibited on both visual and raised characters.
- Protruding post signs. A post sign with its leading edge between 27 and 80 inches cannot reach more than 12 inches into a path.
- Wrong symbol. An altered icon only passes under equivalent facilitation, and you carry the burden of proof.
Fixing these costs far less than the original signs, but only if you catch them before an inspector or a complainant does.
Printed, painted, and temporary signs
Searches for a printable accessible sign are common, and they lead to a trap. A paper sign taped to a door lasts days, and the exemption for temporary signs covers only signs posted 7 days or less. Anything meant to stay up counts as permanent and must comply. Laminated paper also fails the heights, tactile, and finish rules in most cases. Use a durable sign made for the placement.
Painted symbols have their own limit. They help drivers, but they do not count as the required sign. The same goes for a sign that only says "Reserved" without the ISA. The ISA belongs on the permanent sign, and everything else is a supplement.
A sign meant to stay up has to meet the permanent rules, and paper and paint do not.
Getting your accessible signs right
An accessible sign comes down to five decisions: which locations need one, which symbol it carries, how high it mounts, what it is made of, and whether it meets the tactile or visual rules for that spot. Count your accessible spaces, check state and local rules, mount parking signs at least 60 inches up, and keep raised characters and braille between 48 and 60 inches. Use the traditional International Symbol of Accessibility unless a local authority tells you otherwise in writing.
When you are ready to order, see the accessible parking and entrance signs at Safety Decals and choose the reflective grade that fits your lot.