Danger Sign Keep Out: What It Means and When to Use One
A danger sign keep out is a safety sign that bars people from an area where an immediate hazard could cause death or serious injury. It uses the signal word DANGER in white letters on a red panel, followed by KEEP OUT and, ideally, the specific hazard. OSHA and ANSI both reserve that red format for the most severe risks. It is the wrong sign for a cluttered storeroom and the right one for an energized electrical room.
This article covers what the sign means, when a site needs one, and how OSHA and ANSI shape its colors and layout. It also shows how to word, mount, and maintain the sign, and which one to buy when Danger is too strong or not strong enough.
Safety Decals is a Michigan company that makes safety decals and signs in America. The buying advice below comes from the production side of the job.
Why a danger keep out sign matters
What the word Danger commits you to
Danger is the strongest of the four ANSI signal words. It tells the reader that ignoring the sign will result in death or serious injury. Each level has its own color and meaning, so the word you choose is the real decision.
| Signal word | Color | What it tells the reader | Typical use |
|---|---|---|---|
| Danger | Red | Hazard that will cause death or serious injury if not avoided | Energized high-voltage room |
| Warning | Orange | Hazard that could cause death or serious injury | Moving equipment crossing a walkway |
| Caution | Yellow | Hazard that could cause minor or moderate injury | Dumpster area, machine pinch point |
| Notice | Blue | No injury risk, property or policy message | Not for public use |
The common mistake is overuse. When every door says Danger, workers stop reading, and the one door that matters blends in. Reserve red for hazards that can hurt someone before they have time to react.
Red means the hazard is immediate, so save it for places where one wrong step can be the last.
When a site needs one
OSHA publishes no list of rooms that must carry a "Keep Out" sign. Its accident prevention sign standard, 29 CFR 1910.145, says danger signs belong where an immediate hazard exists. Construction work follows the parallel standard, 29 CFR 1926.200. If a hazard is immediate and you leave it unmarked, you have a compliance problem and a liability problem.
In practice, these are the places that usually call for a Danger sign:
- Energized electrical rooms, switchgear, and transformer enclosures
- Permit-required confined spaces, where OSHA's confined space rule (29 CFR 1910.146) calls for a danger sign reading "DANGER, PERMIT-REQUIRED CONFINED SPACE, DO NOT ENTER" or similar language
- Active demolition, excavation, or overhead lifting zones
- Process or chemical areas where exposure can cause serious harm
Your own risk assessment settles the gray areas. If you are unsure whether a hazard is immediate or merely possible, Safety Decals offers risk assessment and consulting that can help you set the level before you order.
How to choose a compliant danger keep out sign
Colors and layout
A compliant Danger sign has a red header with the word DANGER in white letters. OSHA's 1910.145 describes a red upper panel, a black outline, and a white lower panel for the message. ANSI Z535.2, the facility signage standard, uses a signal word panel on top and a message panel below. It also allows the safety alert symbol, a triangle with an exclamation mark, beside the word.
Size depends on how far away the reader first sees the sign. A common stock size is 7" x 10", which suits doors and enclosures. Go larger for gates and fences, where people approach from a distance. High contrast and clean lettering matter more than decoration.
Make the sign readable from the spot where a person still has time to stop.
Wording that works
"Keep Out" on its own is an instruction without a reason. Good danger wording follows a simple pattern: signal word, hazard, consequence, instruction. Telling people what is behind the door makes them far more likely to obey.
DANGER
HIGH VOLTAGE
Risk of electrocution
KEEP OUT. Authorized personnel only.
DANGER
KEEP OUT
Active excavation. Risk of cave-in.
If part of your workforce reads another language, add it to the sign. A warning people cannot read protects no one.
Decal, aluminum sign, or magnetic
Your mounting surface decides the format. Decals bond to machinery, doors, panels, and enclosures. Rigid aluminum signs go on fences, posts, and gates. Safety Decals decals come in ORAFOL vinyl, with optional ORAGUARD laminate and ORALITE reflective vinyl.
| Format | Best for | Watch for |
|---|---|---|
| Standard vinyl decal | Indoor doors, panels, equipment | Clean, dry surface before applying |
| Laminated vinyl decal | Surfaces that get wiped or scuffed | Adds a protective clear layer |
| Reflective vinyl decal | Low-light or night areas | Costs more than standard vinyl |
| Magnetic | Temporary or movable hazards | Only works on steel surfaces |
| Aluminum sign | Fences, posts, perimeters | Needs hardware and a post |
How to place and maintain the sign
Where to mount it
Mount the sign at every point of entry, not just the main door. Put it at eye level, roughly 5 feet off the floor, on the access side where a person decides whether to go in. The sign must be visible before the person is inside the hazard zone. A sign on the far wall is a sign nobody reads in time.
Follow these steps for decals:
- Clean the surface with isopropyl alcohol and let it dry.
- Check that the surface is not wet, oily, or freshly painted.
- Peel back part of the liner and set the top edge level.
- Press from the center outward to push out air.
- Press the edges firmly, especially on textured surfaces.
A Danger sign only works where the reader sees it before the hazard.
Keeping it effective
Walk the site on a schedule and look for faded, scratched, or covered signs. Weather, cleaning chemicals, and stacked inventory are the usual culprits. Replace any sign that has lost contrast, and take one down when the hazard it marked is gone. A Danger sign on a harmless area teaches workers to ignore the rest.
Danger, Caution, Notice, or No Trespassing: what to buy
Matching the sign to the hazard
Pick the sign by the worst outcome in the area, not by how serious you want to look. Here is how the choice maps to Safety Decals products.
| Situation | Sign level | Safety Decals option |
|---|---|---|
| Immediate, life-threatening hazard at a gate | Danger | Danger Keep Clear of Gate decal, 6" x 9", $6.99 to $11.99 |
| Hazard that could cause minor injury, such as a dumpster or machinery | Caution | Caution: Keep Out decal, 7" x 5", $4.99 to $7.99 |
| Restricted by policy, no injury risk | Notice | Notice Not For Public Use decal, 7" x 5", $4.99 to $7.99 |
| Property boundary or trespass control | No Trespassing | Sign - No Trespassing, aluminum, $35.99 to $47.99 |
Prices depend on size and material. If you need exact Danger Keep Out wording, such as "Danger, High Voltage, Keep Out," Safety Decals customizes size, design, colors, and materials. Email sales@safetydecals.com with the wording and the mounting surface.
A worked budget example
Say a yard has 3 gates that need danger wording and a fence line that needs 6 No Trespassing signs. The Danger Keep Clear of Gate decals run 3 x $6.99 = $20.97 to 3 x $11.99 = $35.97. The six aluminum signs run 6 x $35.99 = $215.94 to 6 x $47.99 = $287.94. The whole job comes to $236.91 to $323.91, depending on sizes and materials.
Printable and novelty signs
Searches for printable, funny, or Halloween keep out signs have a different purpose. A paper sign on a bedroom door is fine, but it will not survive weather, and it does not meet OSHA or ANSI formatting. For a workplace, use a durable, compliant sign.
If your goal is to deter burglars, a Danger sign is the wrong tool. A No Trespassing or private property sign states your boundary, and that is the message a trespasser needs to see.
Putting the right sign on the right door
A danger sign keep out means one thing: an immediate hazard lies ahead that can kill or seriously injure. Use red only for that, and word the sign so it names the hazard. Mount it at every entry, and inspect it so it stays legible. Use Caution, Notice, or No Trespassing for everything else.
If you need decals made to your wording, size, and material, talk to Safety Decals about your safety signs and get the right level on every door.