GHS Hazard Symbols: What Each of the 9 Pictograms Means
GHS hazard symbols are nine standardized pictograms that show at a glance what kind of danger a chemical poses. Each one is a black symbol on a white background inside a red diamond border. A flame means fire risk, a skull and crossbones means acute toxicity, and a hand being eaten away means chemical burns. The same nine appear on labels and safety data sheets in every country that uses the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals, which is what "GHS" stands for.
This guide covers why the symbols matter, what each of the nine means, how to read them on a label and a safety data sheet, and where the common mix-ups happen. That includes the optional environmental symbol and the "tenth" symbol people often ask about.
At Safety Decals, we make warning decals and labels for businesses that store and handle hazardous materials. So the guide ends with where hazard warnings belong at your site once the supplier's label no longer reaches.
Why GHS hazard symbols matter at work
GHS hazard symbols matter because they let you recognize a chemical's main danger in a second, before you read a single word. That speed counts when a label is small, a shipment comes from another country, or a coworker reads a different language.
One visual language everywhere
The United Nations created GHS so that the same pictograms mean the same thing worldwide. OSHA revised its Hazard Communication Standard (HCS) in 2012 to match it, so US workplaces now use the same nine symbols as everyone else. Every pictogram falls into one of three groups: physical hazards, health hazards, or environmental hazards.
What the symbols do for your safety program
A pictogram works as a first alert. It tells you to slow down and read more, and it does not replace the rest of the label. OSHA requires hazard communication training for workers exposed to chemicals, and recognizing pictograms is the first thing that training covers.
The details come from the signal word, the hazard statements, the precautionary statements and the safety data sheet. Pictograms never stand alone.
A GHS pictogram names the type of danger, never the full story.
The nine GHS hazard symbols and what each one means
Each of the nine symbols covers a family of hazards, so one pictogram can stand for several hazard classes. Learn the nine families and you can sort most chemicals correctly on sight.
The nine symbols at a glance
The table lists each pictogram by its official code, the hazard type, and what it warns about.
| Symbol | Code | Hazard type | What it warns about | Typical example |
|---|---|---|---|---|
| Exploding bomb | GHS01 | Physical | Explosives, self-reactive chemicals, organic peroxides | Fireworks |
| Flame | GHS02 | Physical | Flammable gases, liquids and solids; pyrophoric and water-reactive materials | Acetone, aerosol paint |
| Flame over circle | GHS03 | Physical | Oxidizers that help other materials burn | Pure oxygen, chlorine gas |
| Gas cylinder | GHS04 | Physical | Gases under pressure | Oxygen bottles, liquid nitrogen |
| Corrosion | GHS05 | Physical and health | Skin burns, eye damage, corrosion of metals | Drain unblocker |
| Skull and crossbones | GHS06 | Health | Acute toxicity that can be fatal | Antifreeze |
| Exclamation mark | GHS07 | Health | Irritation, skin sensitization, lower-level acute toxicity, narcotic effects | Dishwasher tablets |
| Health hazard | GHS08 | Health | Carcinogens, mutagens, reproductive and organ toxicity, respiratory sensitizers | Paint thinner |
| Environment | GHS09 | Environmental | Toxic to aquatic life | Plant protection products |
How to tell look-alike symbols apart
The skull and crossbones and the exclamation mark both warn about acute effects, but severity separates them. The skull marks immediate, severe and possibly lethal toxicity. The exclamation mark marks milder effects such as irritation or dizziness. The health hazard symbol, a figure with a star on the chest, is different again: it warns about harm that builds over time, such as cancer or organ damage. Labels usually do not show both the skull and the exclamation mark for the same hazard. When the more severe symbol covers it, the milder one is dropped.
The three fire symbols answer different questions. The exploding bomb means the material itself can blow up. The flame means it can burn. The flame over circle means it may not burn on its own but will make other materials burn hotter and longer, so keep it away from your flammables.
Ask what the danger is and how fast it acts, and the right symbol follows.
How to read a GHS label and act on the symbols
Read the pictograms first, then the signal word, then the statements, and confirm with the safety data sheet (SDS) before you handle the product. That order takes under a minute and catches most mistakes.
Read a label in five steps
- Match the product identifier on the label to the SDS you have on file.
- Note every pictogram. A label can carry several, and each one counts.
- Read the signal word. "Danger" marks the more severe hazard categories and "Warning" the less severe ones.
- Read the hazard statements, such as "Fatal if swallowed," which say exactly what the chemical can do.
- Follow the precautionary statements for prevention, response, storage and disposal.
Never open or move a container until you know what each pictogram on it means.
Here is a worked example. Say a solvent label shows a flame, an exclamation mark and the word "Danger." The flame tells you to keep ignition sources away. The exclamation mark tells you to expect irritation or similar effects. "Danger" tells you at least one hazard falls in the more severe category. The hazard statements then tell you which effects to plan for.
Confirm on the safety data sheet
Section 2 of every SDS, "Hazard identification," repeats the pictograms, signal word and hazard statements from the label. If the container label is worn, torn or missing, this section tells you what the label should have shown. Before you decant or store a chemical, check that the label and Section 2 agree. If they do not, stop and ask your supplier or safety lead.
Rules and exceptions that cause confusion
Two exceptions explain most of the confusion around the symbols: the optional environmental pictogram and the extra pictograms used in transport. Both are easy to handle once you know the rule.
Format and the optional symbol
In the US, a pictogram must be a black symbol on a white background inside a red diamond border. An empty red diamond with no symbol is not a pictogram and does not belong on a label. Of the nine, OSHA makes eight mandatory. The environmental symbol is non-mandatory in the US because it covers harm outside the workplace. You may still see it on products from other suppliers, and you should treat it seriously. It signals that spills and disposal need special care.
Why people count 10 or more symbols
GHS has exactly nine pictograms. The extras come from separate systems. Transport pictograms are used on packages in transit and follow a different design, with colored backgrounds. The NFPA 704 diamond and HMIS ratings are also not GHS. They use numbers and colors to rate hazards for emergency responders and workers. The pictograms with a red border are the ones for workplace and consumer labels. If a symbol has a colored background or a number in it, it comes from one of these other systems.
How to mark storage areas and containers at your site
The supplier's label covers the container you receive. Your site has to carry that warning forward to transfer containers, cabinets, rooms and equipment.
Labeling what the supplier label does not reach
When you pour a chemical into a smaller container, that container still needs a label with the product identifier and the hazard information. OSHA allows some alternative workplace labeling systems, as long as workers understand them and the information stays consistent with the HCS. Confirm the details for your operation, or ask your safety consultant.
Decals for cabinets, rooms and equipment
Area warnings go on the places where chemicals live. Our hazard and warning decals fit that job. Examples include the Danger, Flammable decal (10.5" x 10.5", $12.99 to $22.99) and the Corrosive Sign decal (10.75" x 10.75", $13.99 to $23.99). The Danger, Explosion decal comes in three small sizes from 1" x 1.5" to 3.6667" x 5.5" ($0.99 to $4.99). Price depends on the material you choose, from standard vinyl to reflective ORALITEĀ®.
For example, a small lab that marks one flammables cabinet and one corrosives cabinet with the 10.5" and 10.75" decals spends $26.98 to $46.98, depending on material. Size and material can be customized, and we also offer regulatory compliance assistance for safety labels.
Pictograms warn you about the chemical. Decals warn everyone about the place it is kept.
Read the symbol, then read the label
The nine GHS hazard symbols sort every chemical into a hazard family at a glance. Fire and explosion hazards, gases under pressure and corrosives are each marked, and so are acute toxins, irritants, long-term health hazards and environmental threats. The symbol only starts the job. The signal word, the hazard statements and Section 2 of the SDS tell you what to do next.
If you are labeling storage areas, cabinets or equipment, start with the chemicals you stock and the hazards they carry. Then match each area to a clear warning. You can browse hazard and warning decals at Safety Decals or contact us for help with custom sizes and compliance questions.